 |
2022 Malaysia Oil Palm Efb Dryer Equipment with 5-110kw Power and 0.8-3m Drum Diameter
Product Details:
| Place of Origin: | Henan, China |
| Brand Name: | SINOLION rptary dryer |
Payment & Shipping Terms:
| Minimum Order Quantity: | 1 unit |
|---|---|
| Price: | $120,000.00/sets >=1 sets |
|
Detail Information |
|||
| Type: | Drum Drying Equipment | Application: | Briquetting Industry |
|---|---|---|---|
| Condition: | New | Voltage: | 220V/380/450v |
| Power: | 5.5-110kw | Dimension(L*W*H): | Based On Different Model |
| Key Selling Points: | Long Service Life | Warranty: | One Year |
| Weight (KG): | 800 | Applicable Industries: | Manufacturing Plant, Energy & Mining |
| Showroom Location: | None | Marketing Type: | New Product 2020 |
| Machinery Test Report: | Provided | Video Outgoing-inspection: | Provided |
| Warranty Of Core Components: | 1 Year | Core Components: | Gear, Motor, Gearbox |
| Product Name: | Oil Palm Efb Dryer Equipment Factory Price | Material: | Carbon Steel,Stainless Steel |
| Drum Diameter: | 0.8-3m | Length Of Dryer: | 8m-30m |
| Heating Source: | Electricity, Steam, Coal, Oil, Gas Etc. | Capacity: | 0.5-40t/h |
| Usage: | Vinasse, Sand, Sawdust, Coal, Pyrite, Slurry, Coke, Slag, Fly Ash | Slope: | 3-5 Degree |
| Speed: | 2.5-8r/min | Weight: | Based On Different Model |
Product Description
Hot Selling in Malaysia Oil Palm Efb Dryer equipment factory price manufacturer
The brief introduction of the EFB rotary drum dryer
Zhengzhou Sinolion rotary drum dryer is specially used in drying EFB and popular among customers in Malyasia and Thailand.
So far, we've already erected nearly 10 plants in Malaysia. The good performance of our rotary dryer can well guarantee the final moisture of final EFB, which is very popular among the market.
The structure ferature of the EFB rotary drum dryer
The palm fiber dryer mainly include feed inlet, heat furnace, filter cartridge, rotating cylinder, material conveyor, cooling cylinder and discharging port. The rotating cylinder, which is installed on the driving roller, moves in low speed depending on the motor and slow transmission. Feed inlet is in between the heat furnace and rotating cylinder and there is stir blade in the rotating cylinder. The baffle with a ostiole is on the connected place of the rotating cylinder and filter cartridge. One end of the filter cartridge is connected with the rotating cylinder.
Components of EFB fiber rotary dryer
All the equipments of EFB fiber rotary dryer consist of feeding system, heating system, trasmission system, driving system, discharging system, dust catching system, electricity control system.
Features of the EFB fiber dryer
1. High drying strength, as the materials are highly decentralized in the airflow, granules' all surface area is the drying effective area.
2. The drying time is short.
3. Flash/Pneumatic dryer's structures are simple, cover an area of a small area, easy to build and repair.
4. Large handling capacity, high thermal efficiency. When dry the unbound water, the thermal efficiency can reach 60%.
Working principle of Palm Fiber Rotary Dryer:
The wet materials are conveyed to the hopper through the belt conveyor or bucket elevator, and then enter into the feed end through the hopper charger and the feeding pipe in sequence. The inclination of the feeding pipe must be greater than the natural inclination of materials in order to make the materials flow into the dryer smoothly. The dryer cylinder with slight inclination with the horizontal line. The materials enter from the higher end, and the heat carrier enters from the lower ender; the two contact each other from opposite directions, but there are also circumstances that the heat carrier flows into the dryer body together with the material. Along with the rotation of cylinder, the materials run to the lower end due to gravity. In the forward movement of wet materials in the dryer body, the wet materials are heated directly or indirectly by the heat carrier to dry the wet materials, and then the materials are discharged from the discharge end through the belt conveyor or screw conveyor.
Technical parameter of Palm Fiber Rotary Dryer:
| Model (mm) | Speed (r/min)
| Gradient (%) | Intake air temperature (℃) | Capacity (t/h) | Weight (t) |
| GZΦ800*8000 | 3.8 | 3-5 | ≤700 | 0.8-2.0 | 3.5 |
| GZΦ1000*10000 | 3.8 | 3-5 | ≤700 | 1.0-3.5 | 5.6 |
| GZΦ1200*10000 | 3 | 3-5 | ≤700 | 1.8-5 | 14.5 |
| GZΦ1500*14000 | 2.08 | 3-5 | ≤800 | 3.3-7.5 | 17.8 |
| GZΦ1800*14000 | 2.08 | 3-5 | ≤800 | 5-9 | 22 |
| GZΦ2200*16000 | 4.7 | 3-5 | ≤700 | 6-12 | 36 |
| GZΦ2400*18000 | 4 | 3-5 | ≤800 | 10-15 | 52 |
Sinolion Palm Fiber Rotary Dryer Advantages:
1.Adopted new combined-type feed and feed device, the center of second material without wind
2. Cleaning, maintenance is convenient
3. High heat efficiency
4. Phenomenon of drying
5. Reliable performance
6. Transmission large and small gear pin can change gear, replaced the traditional gear of cast steel, saving the cost of investment, and also greatly reduces maintenance costs and time.
Standard export packing, Spare parts in wooden case, big machines loaded in container, large machines use nude packing, cover with plastic cloth. We export through Qingdao Port, also can be nominated by customer. We have superior cargo agent to arrange the sea shipment for each client, competitive price, secure transportation.
1.Pre-sale service:
2)Welcome to visit us at any time, we will pick you up.
2.Sale service:
1)Keep clients updated when our company gets advance payment.
2)Confirm production details with clients.
3)Take photos and send all pictures to customers during production.
4)Inspection and testing the product before delivery;
5)Clients are welcome to inspect the equipment when the equipment are ready to delivery. We will arrange cars, hotels and translators for customers.
6)logistics service if needed.
3.After Sale service:
1)Provide foundation drawing to the clients for installation.
2)Besides, our engineers are available to help with installation and workers training.
3)Repairing and maintenance if any problem occur in the warranty.
4)Spare parts and wearing parts will be offered with production cost in 10 years.